Table Of Contents
SHOW
Problem：Insufficient carbonization of materials
Reason：Material water content is relatively large
Solution:
①Lengthen the time period of carbonization
②Control the moisture of the material below 25%
Problem：The degree of carbonization of the finished carbon is different
Reason：The size of carbonized raw materials is different
Solution：
Try to place uniformly sized materials (below 10cm) in the carbonization furnace
Problem：The temperature does not rise
Reason：
①The raw material is too wet
②The materials placed in the carbonization furnace are stacked too densely
Solution：
①Control the moisture content of raw materials below 25%
②Reduce the materials in the inner furnace
Problem：Air leakage
Reason：
The interfaces are not tightly sealed
Solution：
Strengthen the sealing of each interface
